Underground PVC Insulated Copper Core Power Wire Cable

Underground PVC Insulated Copper Core Power Wire Cable

Steve Wei Sales Manager
 
 
 
 
1.Application
This cable is used as power distribution and transmission line at rated voltage 0.6/1KV which can be fixed installed.
 
2.Service Characteristics
1.The long time working temperature of the conductor should not be higher than 90 ºC
2.When conductor is in short-circuit (max. 5s), the conductor temperature should not higher than 250ºC.
3.While installation the ambient temperature should not be lower than 0 ºC and the bending radius should not be less than 10 times of outer diameter of cable.

3.Model & Name

Available model upon request as below.
 
Note: Low smoke Zore Halogen, Flame Retardant, copper screened type are also available upon request.

4.Structure Size&Technology Data



5.Technology Property
5.1 Bending Radius
Single Core Cable Permitted Bending Radius=20 (d+D)±5%
Multi Cores Cable Permitted Bending Radius=15 (d+D)±5%
D=Outer Diameter Of Cable (mm)
d=Outer Diameter Of Conductor (mm)
 
5.2 Installation Temperature
Preheat is required when temperature is lower than 0ºC
 
5.3 Installation Drop
Cable Installation is not limited by level drop.

For more information,
Steve Wei Sales Manager
 
 
 
 

  Underground PVC Insulated Copper Core Power Wire Cable

Steve Wei Sales Manager
 
 
 
 
1.Application
This cable is used as power distribution and transmission line at rated voltage 0.6/1KV which can be fixed installed.
 
2.Service Characteristics
1.The long time working temperature of the conductor should not be higher than 90 ºC
2.When conductor is in short-circuit (max. 5s), the conductor temperature should not higher than 250ºC.
3.While installation the ambient temperature should not be lower than 0 ºC and the bending radius should not be less than 10 times of outer diameter of cable.

3.Model & Name

Available model upon request as below.
 
Note: Low smoke Zore Halogen, Flame Retardant, copper screened type are also available upon request.

4.Structure Size&Technology Data



5.Technology Property
5.1 Bending Radius
Single Core Cable Permitted Bending Radius=20 (d+D)±5%
Multi Cores Cable Permitted Bending Radius=15 (d+D)±5%
D=Outer Diameter Of Cable (mm)
d=Outer Diameter Of Conductor (mm)
 
5.2 Installation Temperature
Preheat is required when temperature is lower than 0ºC
 
5.3 Installation Drop
Cable Installation is not limited by level drop.

For more information,
Steve Wei Sales Manager
 
 
 
 

 

Electric Kettle

Water Kettle,Electric Water Pot,Cordless Electric Kettle

Blender,Electric Iron Co., Ltd. , http://www.nskitchenappliance.com