Cat5/Cat5e/CAT6/CAT6A Keystone Jack

CAT5E 180DEGREE FTP KEYSTONE JACK 
LK-5KJF003


Specification





LK-5KJU016

Cat5e UTP keystone Jack
 
1.Two types of tools can be applied for pin termination: 110 type 
2.Punch down tool or easy termination E-TOOL
3.E-TOOL allows for termination and cutting of all excess wires 
4.Simultaneously in one squeeze 
5.High-impact, flame-retardant plastic housing
6.IDC connectors accept 22-24 AWG wire



 
Electrical characteristics
 
In accordance with UL 1863
Current rating: 1.5 max
Voltage rating: 150 V
Contact resistance: 20 mohm
Insulation resistance: 500 Mohm
Dielectric withstand voltage: 1000 V, AC RMS, 60 Hz/1min




LK-6AKJF001

Specifications
Cat6A Keystone Jack: 
1Available in Cat6 T568 A T568 B wiring. 
2Easy to be terminated 
Low attenuation loss 




Cat6A Keystone Jack:
 
Products Description
A shielded version is available to maximum protection from EMI/RFI interference by utilizing fully shielded jacks and connecting hardware, you can reduce the effects of interference on the network data transmissions . The compact size provides high-density connectivity in the work area and telecommunications room .
Features and benefits 
1.Available in Cat6, T568A/B wiring schemes, meet or exceed TIA/EIA Cat6 requirements .
2.Shielding protects against EMI/RFI interference 
3.Housing: high temperature thermoplastic
4.Compact jack design, 8 positions and 8 conductors
5.Contact: phosphor bronze, phosphor bronze with 6 to 50μ gold plate 
6.Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mm 
7.Easy to be terminated,extremely low attenuation loss and high return loss 
8.High reliability and superior performance


LK-6KJF003


 

FTP Cat.6 Keystone Jack 180 degree 

ELECTRICAL:

1. Voltage rating: 125 VAC RMS

2. Current rating: 1.5 AMP

3. Contact resistance: 100 Milliohms MAX

4. Insulation resistance: 1000 Megohms MIN @ 500 VDC

5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN

6. C6 permanent link: Conform to ANSI/TIA/EIA-568B.2-1

ENVIRONMENTAL:

1. Storage: -40°TO +85°

2. Operation: 0°TO 70°

Mates with modular plug conforming to FCC part 68, Subpart F.

MECHANICAL:

1. Shield material: Brass T=0.30mm Nickel plating

2. Housing material: PC UL94V-0

3. Inser material: Flame retardancy ABS UL94V-0

4. PCB material: FR-4 Thickness:1.6mm

5. Contact material: Phosphor bronze stamp PIN T=0.35mm

6. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating

7. Wire: AWG 24-26

CAT6 90DEGREE TOOLESS KEYSTONE JACK
LK-6KJU014

ELECTRICAL:

1. Voltage rating: 125 VAC RMS

2. Current rating: 1.5 AMP

3. Contact resistance: 100 Milliohms MAX

4. Insulation resistance: 1000 Megohms MIN @ 500 VDC

5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN


 

ENVIRONMENTAL:

1. Storage: -40°TO +85°

2. Operation: 0°TO 70°

Conform to TIA/EIA 568B Category 5e

Mates with modular plug conforming to FCC part 68, Subpart F.

MECHANICAL:

1. Housing material: PC UL94V-0

2. Inser material: Flame retardancy ABS UL94V-0

3. PCB material: FR-4 Thickness:1.6mm

4. Contact material: Phosphor bronze stamp PIN T=0.35mm

5. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating

6. Wire: AWG 24-26


Lulink Electronics Technology Co. Ltd 
Established in 2005 with headquarter and R&D managing department based in Guangzhou.
Lulink is an export organization specialized in developing,designing,producing network intellgent wire and telecommunication equipments,the products range consists of main categories and metal sheeting,Lulink is supported by a strong R&D team which has more than three years experience in the field of technology and integrating brilliant designers,technicians,support groups,sales and marketing organizations.We offers and accepts OEM/ODM service to customers.We have evperienced employees,respectively specialized in management,all the workers received the professional training with some years experience for their activities.
Our Main products:
Copper System:LAN cables,  Adaptor,  Connector and Spliter,  Cabinet, PATCH CORD, TOOLS, Coaxial cables 
Fiber Optic: fiber optic patch cord, PLC splitter, adapter, connector, closure, media converter, etc
Cable Assembly: USB cable, HDMI cable, VGA cable, AV cable, DVI cable, etc
 
All has been certified by ISO9001:2008/ROHS/CE/UL/3C and so on.
 
You receive the highest quality products,deliverd on timeand 100% tested and inspected.We guaranty our products with long time end-to-end networks solution by the term.Lulink guarantees to offer safer and more reliable products with reasonable prices.
 
 
If you are interested in our products and want to know more details,please feel free contact me

William Zhang
Lulink Electronics Technology Co., Ltd.

CAT5E 180DEGREE FTP KEYSTONE JACK 
LK-5KJF003


Specification





LK-5KJU016

Cat5e UTP keystone Jack
 
1.Two types of tools can be applied for pin termination: 110 type 
2.Punch down tool or easy termination E-TOOL
3.E-TOOL allows for termination and cutting of all excess wires 
4.Simultaneously in one squeeze 
5.High-impact, flame-retardant plastic housing
6.IDC connectors accept 22-24 AWG wire



 
Electrical characteristics
 
In accordance with UL 1863
Current rating: 1.5 max
Voltage rating: 150 V
Contact resistance: 20 mohm
Insulation resistance: 500 Mohm
Dielectric withstand voltage: 1000 V, AC RMS, 60 Hz/1min




LK-6AKJF001

Specifications
Cat6A Keystone Jack: 
1Available in Cat6 T568 A T568 B wiring. 
2Easy to be terminated 
Low attenuation loss 




Cat6A Keystone Jack:
 
Products Description
A shielded version is available to maximum protection from EMI/RFI interference by utilizing fully shielded jacks and connecting hardware, you can reduce the effects of interference on the network data transmissions . The compact size provides high-density connectivity in the work area and telecommunications room .
Features and benefits 
1.Available in Cat6, T568A/B wiring schemes, meet or exceed TIA/EIA Cat6 requirements .
2.Shielding protects against EMI/RFI interference 
3.Housing: high temperature thermoplastic
4.Compact jack design, 8 positions and 8 conductors
5.Contact: phosphor bronze, phosphor bronze with 6 to 50μ gold plate 
6.Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6 mm 
7.Easy to be terminated,extremely low attenuation loss and high return loss 
8.High reliability and superior performance


LK-6KJF003


 

FTP Cat.6 Keystone Jack 180 degree 

ELECTRICAL:

1. Voltage rating: 125 VAC RMS

2. Current rating: 1.5 AMP

3. Contact resistance: 100 Milliohms MAX

4. Insulation resistance: 1000 Megohms MIN @ 500 VDC

5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN

6. C6 permanent link: Conform to ANSI/TIA/EIA-568B.2-1

ENVIRONMENTAL:

1. Storage: -40°TO +85°

2. Operation: 0°TO 70°

Mates with modular plug conforming to FCC part 68, Subpart F.

MECHANICAL:

1. Shield material: Brass T=0.30mm Nickel plating

2. Housing material: PC UL94V-0

3. Inser material: Flame retardancy ABS UL94V-0

4. PCB material: FR-4 Thickness:1.6mm

5. Contact material: Phosphor bronze stamp PIN T=0.35mm

6. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating

7. Wire: AWG 24-26

CAT6 90DEGREE TOOLESS KEYSTONE JACK
LK-6KJU014

ELECTRICAL:

1. Voltage rating: 125 VAC RMS

2. Current rating: 1.5 AMP

3. Contact resistance: 100 Milliohms MAX

4. Insulation resistance: 1000 Megohms MIN @ 500 VDC

5. Dielectric strength: 750 VAC RMS 60Hz, 1MIN


 

ENVIRONMENTAL:

1. Storage: -40°TO +85°

2. Operation: 0°TO 70°

Conform to TIA/EIA 568B Category 5e

Mates with modular plug conforming to FCC part 68, Subpart F.

MECHANICAL:

1. Housing material: PC UL94V-0

2. Inser material: Flame retardancy ABS UL94V-0

3. PCB material: FR-4 Thickness:1.6mm

4. Contact material: Phosphor bronze stamp PIN T=0.35mm

5. IDC Contact material: Phosphor bronze T=0.50mm with nickel plating

6. Wire: AWG 24-26


Lulink Electronics Technology Co. Ltd 
Established in 2005 with headquarter and R&D managing department based in Guangzhou.
Lulink is an export organization specialized in developing,designing,producing network intellgent wire and telecommunication equipments,the products range consists of main categories and metal sheeting,Lulink is supported by a strong R&D team which has more than three years experience in the field of technology and integrating brilliant designers,technicians,support groups,sales and marketing organizations.We offers and accepts OEM/ODM service to customers.We have evperienced employees,respectively specialized in management,all the workers received the professional training with some years experience for their activities.
Our Main products:
Copper System:LAN cables,  Adaptor,  Connector and Spliter,  Cabinet, PATCH CORD, TOOLS, Coaxial cables 
Fiber Optic: fiber optic patch cord, PLC splitter, adapter, connector, closure, media converter, etc
Cable Assembly: USB cable, HDMI cable, VGA cable, AV cable, DVI cable, etc
 
All has been certified by ISO9001:2008/ROHS/CE/UL/3C and so on.
 
You receive the highest quality products,deliverd on timeand 100% tested and inspected.We guaranty our products with long time end-to-end networks solution by the term.Lulink guarantees to offer safer and more reliable products with reasonable prices.
 
 
If you are interested in our products and want to know more details,please feel free contact me

William Zhang
Lulink Electronics Technology Co., Ltd.

Gesture Sensor Light includes two colors, that is Gesture Sensor Adjustable Light Tiffany Blue and Gesture Sensor Adjustable Light Sakura Pink. As desk lamp, bedside lamp, emergency lamp, Christmas and birthday gifts, this product will be your best choice for varied occasions.

Features:

• ABS material: soft body; intimate feeling
• Breathing state: best sleeping companion
• Adjustable brightness: meet different demands on light
• Minimalist design: Nordic style; pursue beauty from technology
• Rechargeable lithium battery: power saving; low power consumption
• Gesture sensor: without physical switch, for more convenient experience
• Soft light source: Without flickering or blue light; warm light color temperature; eye-caring

Specifications:

Power	0.1-2W	Shell Material	ABS
Input Voltage	DC5V/1A	PCS/CTN	24PCS
Battery Capacity	2600mAh	Per CTN	58x40x41.5cm
Per piece	16x16x7.5cm	Per pack N.W./G.W.	0.4KG/0.8KG
Per pack	18x18x9.8cm	Per CTN N.W./G.W.	19.2KG/21KG

Approved Certifications: CE,FCC, RoHS

OEM Customization: available

Instructions:

1.Activate and cut off power supply

• Activate power supply: for first using or restarting, by USB wire connect product to any devices with USB port, as PC, laptop, power bank etc.
• Cut off power supply: pull out external power supply wire of product; move hand back and forth quickly for more than 3 times, above induction point; light will flash quickly for 3 times, then power is cut off. It's recommended to turn off power when the product will be idled for a long time or moved to a distant place.

2.Turn on /off light

• Turn on the light: on condition of light being off but activated, move hand for 1 time above induction point.
• Turn off light:  on condition of light being on, move hand for 1 time above induction point.

3.Adjust brightness

On condition of light being on, keep hand within 20cm above induction point, then brightness will change cyclically from bright to dark. Move off hand till the brightness is proper.

4.Turn on / off  breathing state

• Turn on breathing state: on condition of light being on, move hand back and forth quickly above induction point for 1 time, then brightness will changefrom bright to dark.cyclically and automatically, with a frequency of 16 times per min., which is the breathing state.
• Turn off breathing state: on condition of breathing state, move hand for 1 time above induction point, then light is off ; when breathing state lasts for 20mins, then light is off.

Recommendation for use:

• The height of gesture should be within 20cm above the induction point of product.
• Within 60cm above induction point, shielding object is not allowed lest misoperation may occur.
• Recommended to supply power to the product by USB power adapter with DC5V/1A specification.
• The battery in the product performs best when working at normal room temperature of 30℃ ~ -5℃.
• When the product is out of power, please insert the enclosed USB wire into USB port of other devices, with time for 3-4hs.

Gesture Sensor Light

Gesture Sensor Light,Intelligent Sensor Light,Led Motion Sensor Light,Sensor Gesture Control Light

Ningbo Sinco Industrial & Trading Co., Ltd. , http://www.newsinco.com