Municipal Engineering LED Street Light and Cable Purchase Tender Notice

Title: Municipal Engineering LED Street Light and Cable Purchase Tender Notice Tender No.: hb2009025 Announcement Date: March 11, 2009 Deadline: March 12, 2009 Tendering Agency: Province: Anhui Province - Huaibei City Content: 1. Engineering Name: Municipal Engineering Street Lamp and Cable Purchase

2. Bidding method: open tendering

3. Construction scale: The total length is about 1.5km, the arrangement spacing is 40 meters, and the two sides are symmetrically arranged.

4. Content of the bidding:

1. 80 sets of street lamps, about 720,000 yuan. LED light source street light is used, and the owner and relevant departments jointly inspected and determined that the LED street light lamps used in this street light are LED lamps produced by Jiangsu Haotian Songri LED Lamp and Zhongweiguang Electronics (Weifang) Co., Ltd. The total power of street lamp is 110W. +60W double-picked street light, power is 110W single-handed street light, power is 3*110W intersection high pole row light. (See the bidding documents for details)

2, the cable is about 3330 meters, using VV224 × 16 mm2 + 1 × 10mm2 cable, VV224 × 50 mm2 cable, about 120,000 yuan (see the bidding documents for details)

The maximum price of the street lamp is: the whole set of lamps (including the light pole, the lamp and the wire inside the pipe) is 9,000 yuan/column. Company Name: Anhui Hengzheng Construction Engineering Project Management Co., Ltd. Contact: Dari Tel: 0561-3053399 E-mail: Fax: 0561-3056499 Postal Code: 235000 Address: 2nd Floor, Building 8#, Qingheyuan, Renmin Road, Huaibei City

The Substation Fitting is mainly used for the connection of the bus down-lead of substation and the outlet terminal of electrical equipment (such as transformer, circuit breaker, isolating switch and mutual inductor). Because the outlet terminal of electrical equipment commonly made by copper and aluminum, while the bus down-lead is divided into aluminium strand wire or steel core aluminum strand wire, the equipment, by material, was into the aluminum and copper two series. According to the installation method and structure of the different equipment, the line clamp was divided into bolt type and compression type. Each type of wire clip is divided into three, listing as 0, 45 and 90 degrees according to the angle of the down-lead and the installation of the terminals from the electrical equipment.

Substation Fitting

Grid Line Fitting,Power Fitting For Substation,Transmission Line Hardware,Substation Cable Fitting,High Voltage Connector ,Insulated Clamps ,Straight Line Clamp

Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com