Giant's pace: Intel moves toward 7nm in 2017

Giant's pace: Intel moves toward 7nm in 2017 Mike Mayberry, Intel’s vice president of technology and manufacturing, and director of component research, today announced a semiconductor process roadmap that showcases Intel’s manufacturing process planning in the coming years.

According to this roadmap, Intel’s semiconductor process will continue to strictly enforce the Tick-Tock strategy and will be upgraded every two years. Currently being developed is the 22nm process, which is expected to be produced in the second half of the year and released in the first half of next year. Next, in 2013, it will shift to 14nm, and in 2015 it will continue to progress to 10nm.

From then on until 2017, Intel will bring us 7nm. This is the first time that semiconductor technology has entered the single digit era. As for what kind of process is used in 2019, Intel is still studying it.

In order to ensure this steady and rapid progress, Intel is always paying attention to and selecting the latest semiconductor manufacturing technologies. The main research objects in the next few years are 3-D tri-gate transistors, III-V complexes, and optical interconnections. , Computational Lithography, High-K Gallium, Raw Material Synthesis, High Density Memory, Nanowires, etc.

In more than ten years, each upgrade of Intel's technology has brought about a 30-40% improvement. The strong R&D strength is enviable. The myth of Moore's Law has also been continued. Perhaps as Intel put it: "Moore's Law is not a law of nature, but an expectation of continuous innovation."

Thick Copper PCB

Thick Copper Pcb products are used extensively in power electronic devices and power supply systems. A growing trend in the PCB industry, this unique type of Heavy Copper Pcb features a finished copper weight of more than 4oz (140μm), compared to the 1oz (35μm) or 2oz (0μm) copper weight generally found in those with a Standard PCB copper thickness.  

The additional copper PCB thickness enables the board to conduct a higher current, achieve good thermal distribution and implement complex switches in a limited space. Other advantages include increased mechanical strength at connector sites, the ability to create a smaller product size by incorporating multiple weights on the same layer of circuitry and the ability to use exotic materials to their maximum capacity with minimal risk of circuit failure. 

Copper PCB Manufacturing Capabilities Table

BentePCB is a highly skilled PCB manufacturer that can develop and produce a superior thick copper PCB product of the highest quality. We offer a thick copper PCB manufacturing service that uses copper weights of up to 16oz (560μm). Check our capabilities in the following table:

Features

Capability

Quality Grade

Standard IPC 2

Number of Layers

1 - 6layers

Order Quantity

1pc - 10000+pcs

Build Time

2days - 5weeks

Material

FR-4 Standard Tg 140°C, FR4-High Tg 170°C

Board Thickness

0.8mm - 6.5mm

Max Outer Layer Copper Weight (Finished)

16oz

Max Inner Layer Copper Weight

6oz

Min Tracing/Spacing

For External layers: 
4oz Cu 8mil/12mil 
5oz Cu 10mil/14mil 
6oz Cu 12mil/16mil 
12oz Cu 20mil/32mil 
16oz Cu 32mil/40mil 

For Internal layers: 
4oz Cu 8mil/12mil 
5oz Cu 10mil/14mil 
6oz Cu 12mil/16mil 

Solder Mask Sides

As per the file

Solder Mask Color

Green, White, Blue, Black, Red, Yellow

Silkscreen Sides

As per the file

Silkscreen Color

White, Black, Yellow

Surface Finish

OSP

HASL - Hot Air Solder Leveling
Lead Free HASL
ENIG - Electroless Nickle/Immersion Gold

Flash Gold (Soft Gold)

Gold Plated

Immersion Silver

Immersion Tin

Finished Copper PCBs of Superior Quality

BentePCB has a decade of experience in manufacturing and assembling high-performing standard and Heavy Copper PCB products that help our customers achieve their productivity and profitability goals. We make it a standard operating procedure to have our highly skilled engineers run design for manufactureon every circuit file, and address all questions and concerns before production. This helps to ensure the finished electronic boards meet your performance expectations. Our capable staff includes an in-house quality control department - we guarantee the quality of our Printed Circuit Boards.

(Note: To ensure we can fabricate your thick copper PCB correctly, it is important to take the greater width of traces and spacing between the traces caused by the increased copper weight into consideration.) 

 

About Us:

BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.

Why Us?

UL (E492586), ISO9001,  ISO14001, TS16949, RoHS certified.
Turnover USD 
10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 
16 layers.
Special Material:
ROGERS, Arlon, Taconic.etc.
Client:
Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.


Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):

ISO9001,ISO14001UL:E492586

Factory Tour:

PCB Manufacturer

PCB Factory

PCB Manufacturing

Exhibition:

We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.

Exhibition

Delivery:

BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
Delivery

FAQ:

Q1: What does BentePCB need for a customized PCB order?
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.
Q5: How about the service BentePCB offered to the customers?
A: If you have any questions about our products or company, do not hesitate to send us your inquiry toour customer service representatives, Your satisfaction is our pursuits.

PCB China

We don`t just sell PCBs .We sell sleep.

Contact Us

Thick Copper PCB

Thick Copper Pcb,Thick Copper Board,Heavy Copper Pcb,Heavy Copper Boards

Shenzhen Bente Circuit Limited , http://www.bentegroup.com