Market availability of warm-white power LEDs is limited by requirements for both high efficacy and long-term stability, writes Tim Whitaker. White high-power LEDs at higher color temperatures are now widely available, but the performance of warm-white power LEDs is The last time saw the introduction of several new power LEDs, such as the Luxeon K2 from Philips Lumileds, the XLamp XR- E from Cree, and the P4 from Seoul Semiconductor, all offering very high performance in cool white temperatures. However, none are currently available in warm white.
While the cool white XR-E produces 80 lm typical at 350 mA, the luminous flux available from warm white devices on the market is interesting lower, typically around 30 lm for a correlated color temperature (CCT) of 3500K. This of course affects the Economic argument for using warm white LEDs in place of incumbent lighting technologies.
There are some exceptions such as Nichias NS6L083 1W product, which is rated at a luminous flux of 52 lm (the median value in the distribution) at 300 mA for 3500K, and 48 lumens at 2800K. This LED contains six small chips, resulting in High efficacy, while Nichias Power Rigel, a single-chip 1.2W power LED, is rated at 32 lm at 350 mA at 2800K, and has a maximum operating current of 650 mA.
In contrast, Cree limits its warm white XLamp 7090 XR series LEDs (the version preceding the XR-E) to 350mA, while the rest of its product line is rated at 700mA and higher. The reason is to ensure that customers can achieve the stated Datasheet performance values ​​with reliability measured at standard conditions of 85°C and 85% relative humidity.
Chromaticity shift
The main issue with warm white LEDs, according to Crees Mark McClear, has been with the stability of the phosphor systems in the presence of high current densities and high junction temperatures. These conditions cause the red components of the [warm white] phosphor to degrade And the stop emitting light at these wavelengths, he says. This manifests itself as a pronounced shift towards the blue (cooler color temperature) end of the CCT range. When the LEDs chromaticity shifts, the device can quickly change from warm white to cool white. This is particularly unacceptable for indoor applications in which warm-white LEDs are seeking to replace incandescent lamps.
McClear says that Crees qualification requirements for white LEDs are that the (x,y) chromaticity shift should remain within one bin. To meet this requirement, we have maintained the same rigorous 85°C/85% conditions, but have had to limit the Drive current of this product to 350 mA, he says. Others have solved this problem by reducing the conditions on their testing to 85/60 or 60/90.
Chromaticity shift is not limited to warm white LEDs. Seouls new P4 power LED package has a nominal CCT of 6500 K, and a typical output of 85 lm at 350 mA, equivalent to 76 lm/W. Elsewhere on the same P4 datasheet, there I a a a a a a a a a Phosphor is very efficient, hence the excellent luminous flux and efficacy, but is not particularly stable over time.
Higher efficacy
Interestingly Nichia has a slightly different view of the warm white issue. Nichia Americas Dan Doxsee agrees that color shift for warm white is greater than for cool white. It is not well understood why, and our researchers in Japan are investigating this, he says. It appears to be related to packaging materials and heat, more than phosphors. One factor with warm-white LEDs is that they contain a higher mass of phosphor, which has an insulating effect and causes the local temperature in the package to be slightly higher.
The efficacy of red phosphor(s) varies from company to company, he says. The Nichia warm white efficacy is the industrys highest since we have a very good red phosphor Nichia has been a phosphor company for decades. In the incandescent (warmest) rank of 2800K, which is the lowest efficacy rank, the efficacy is 80% of the cool white value.
Even so, Doxsee says that Nichia is continued to work on phosphors and packaging materials to improve the quality of its warm white devices. The next generation of the NS6L083, launching in the second half of 2007, will be 40% brighter than the current version For both cool and warm white color ranks.
Cree expects to launch a warm white version of the XR-E in the first half of 2007. McClear says the new product will address the issues of limited drive current and chromaticity shift. Not before time, it appears that warm-white LEDs are poised To make significant improvements during 2007. About the Author Tim Whitaker is the Editor of LEDs Magazine![]()
February 2007 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2004 2005 2006 2007 2008 2009 ![]()
While the cool white XR-E produces 80 lm typical at 350 mA, the luminous flux available from warm white devices on the market is interesting lower, typically around 30 lm for a correlated color temperature (CCT) of 3500K. This of course affects the Economic argument for using warm white LEDs in place of incumbent lighting technologies.
There are some exceptions such as Nichias NS6L083 1W product, which is rated at a luminous flux of 52 lm (the median value in the distribution) at 300 mA for 3500K, and 48 lumens at 2800K. This LED contains six small chips, resulting in High efficacy, while Nichias Power Rigel, a single-chip 1.2W power LED, is rated at 32 lm at 350 mA at 2800K, and has a maximum operating current of 650 mA.
In contrast, Cree limits its warm white XLamp 7090 XR series LEDs (the version preceding the XR-E) to 350mA, while the rest of its product line is rated at 700mA and higher. The reason is to ensure that customers can achieve the stated Datasheet performance values ​​with reliability measured at standard conditions of 85°C and 85% relative humidity.
Chromaticity shift
The main issue with warm white LEDs, according to Crees Mark McClear, has been with the stability of the phosphor systems in the presence of high current densities and high junction temperatures. These conditions cause the red components of the [warm white] phosphor to degrade And the stop emitting light at these wavelengths, he says. This manifests itself as a pronounced shift towards the blue (cooler color temperature) end of the CCT range. When the LEDs chromaticity shifts, the device can quickly change from warm white to cool white. This is particularly unacceptable for indoor applications in which warm-white LEDs are seeking to replace incandescent lamps.
McClear says that Crees qualification requirements for white LEDs are that the (x,y) chromaticity shift should remain within one bin. To meet this requirement, we have maintained the same rigorous 85°C/85% conditions, but have had to limit the Drive current of this product to 350 mA, he says. Others have solved this problem by reducing the conditions on their testing to 85/60 or 60/90.
Chromaticity shift is not limited to warm white LEDs. Seouls new P4 power LED package has a nominal CCT of 6500 K, and a typical output of 85 lm at 350 mA, equivalent to 76 lm/W. Elsewhere on the same P4 datasheet, there I a a a a a a a a a Phosphor is very efficient, hence the excellent luminous flux and efficacy, but is not particularly stable over time.
Higher efficacy
Interestingly Nichia has a slightly different view of the warm white issue. Nichia Americas Dan Doxsee agrees that color shift for warm white is greater than for cool white. It is not well understood why, and our researchers in Japan are investigating this, he says. It appears to be related to packaging materials and heat, more than phosphors. One factor with warm-white LEDs is that they contain a higher mass of phosphor, which has an insulating effect and causes the local temperature in the package to be slightly higher.
The efficacy of red phosphor(s) varies from company to company, he says. The Nichia warm white efficacy is the industrys highest since we have a very good red phosphor Nichia has been a phosphor company for decades. In the incandescent (warmest) rank of 2800K, which is the lowest efficacy rank, the efficacy is 80% of the cool white value.
Even so, Doxsee says that Nichia is continued to work on phosphors and packaging materials to improve the quality of its warm white devices. The next generation of the NS6L083, launching in the second half of 2007, will be 40% brighter than the current version For both cool and warm white color ranks.
Cree expects to launch a warm white version of the XR-E in the first half of 2007. McClear says the new product will address the issues of limited drive current and chromaticity shift. Not before time, it appears that warm-white LEDs are poised To make significant improvements during 2007. About the Author Tim Whitaker is the Editor of LEDs Magazine
Up Light
A practical and highly functional steel brushed LED Floor Lamp series LED Tamara. The uplight comes with 2 x 10 watt LED lamp, Reading Lamp includes 1 x 10 watt LED lamp. Both can be dimmed with a dimmer switch pulse in the center panel. Because of the spring, you can aim the reading light exactly where you need the light. The LED module is replaceable.
Up Light
uplighting,Led Emergency Up Light,Solar Led Up Light,Outdoor Up Light
Dongguan D-win Lighting Co., Ltd. ,