How to judge the polarity of electret microphone
The electret microphone is small in size, simple in structure, good in electroacoustic performance, low in price and widely used. The internal structure of the electret microphone is shown in the figure. It is composed of two parts: acoustic-electric conversion system and field effect tube. There are two ways to connect its circuit: source output and drain output. The source output has three leads, the drain D is connected to the positive power supply, the source S is grounded through a resistor, and then a capacitor is used for signal output; the drain output has two leads, the drain D is connected to the positive power supply through a resistor, and then A capacitor is used for signal output, and the source S is directly grounded. Therefore, before using an electret microphone, it is necessary to determine its polarity. 
It can be seen from the basic structure shown in the figure that a diode is connected between the gate and the source of the field effect tube, so the forward and reverse resistance characteristics of the diode can be used to distinguish the drain D and source S of the electret microphone.
Dial the multimeter to the R × 1kΩ position, the black test lead is connected to one pole, and the red test lead is connected to the other pole. Then swap the two test leads and compare the two measurement results. When the resistance is small, the black test lead is connected to the source and the red test lead is connected to the drain.
2835 SMD IR LED supplier from China.
We produce and sell 2835 SMD IR LED , which is with the wavelength from 680nm-1550nm.
In this category, we mainly introduce the two kinds of wavelengths: 940nm IR LED and 850Nm IR LED. These two wavelengths are the most commonly used wavelengths in infrared monitoring. They all can be used to monitor products.
940nm infrared LEDs are totally invisible to the naked eye, which means you can't see whether the 940nm working or not. Unless you watch it through some device(like phone's camera), which will show some purple or white color light.
The 850nm infrared LEDs have a very slight reddish when it's working, which means you can see if the 850nm LED is working.
Under the same power, radiation intensity of 850nm will be higher than the 940nm. Of course, 940nm also has its own unique advantages. It is the naked eye that is indistinguishable from work or from work, therefore, its application has been widely used in many special markets in the modern era.
We supply the 2835 940nm SMD IR LED and 2835 850nm SMD IR LED products with difference power, such as: 0.1W 940nm, 0.2w 940nm, 0.3w 940nm, 0.4w 940nm, 0.5W 940nm, 0.6w 940nm, 0.8W 940nm, 1w 940nm, 3W 940nm, 0.1W 850nm, 0.2w 850nm, 0.3w 850nm, 0.4w 850nm, 0.5W 850nm, 0.6w 850nm, 0.8W 850nm, 1w 850nm, 3W 850nm and so on.
In addition, we also add the lens on the top of SMD LED , which can make the SMD LED have an angle like those Thought-hole LED.
We also can customize the mold of ledns as you needed angle.
2835 SMD IR LED
2835 SMD IR LED,2835 SMD IR LED 940Nm,IR LED 850Nm 2835 SMD,IR Laser LED SMD 2835
Shenzhen Best LED Opto-electronic Co.,Ltd , https://www.bestsmd.com