Based on the high standard requirements of automotive lamps for LED components, the market pays more attention to the reliability and stability of automotive light source products introduced by domestic packaging manufacturers. Recently, Hongli Optoelectronics has launched C2525, a vehicle LED light source with high reliability and high light output density.
The high-power ceramic packaging product is a mature LED packaging technology product of Hongli Optoelectronics. It adopts a new white light packaging technology to ensure the uniformity of the color of the product. Among them, Baiguang C3535 has obtained a third-party LM-80 6000 hour test report, which guarantees a good service life and luminous flux maintenance rate. The C2525 package is smaller in size, which is more conducive to luminaire design and secondary optical design; it has a higher light output density. This eutectic-based ceramic LED package device is highly reliable and efficient, meeting the harsher automotive lighting environment requirements.
.jpg)
In order to verify whether the product can meet the high standard requirements of automotive lighting, Hongli Optoelectronics invited the LED-FPD Engineering Technology Research and Development Center of Hong Kong University of Science and Technology of Foshan as a third-party testing agency to conduct data testing on the company's C2525 sample, and an international The first-line brand of the same type 2525 optoelectronic products (hereinafter referred to as "brand C") joined the evaluation to show the market's technical strength and product competitive advantage in the automotive lighting field. (The following information is from a third-party assessment report)
.jpg)
Transient photoelectric parameter
Let's first take a look at the transient parameters of the voltage, luminous flux, luminous efficacy, color temperature and color rendering index of Hongli Optoelectronics and Brand C at a current value of 350 mA. In order to compare each of our product models, five different numbers of samples were selected for testing.
.jpg)
From the test data, the sample of Hongli Optoelectronics and the sample of brand C, the transient photoelectric parameters are basically kept at the same level, even slightly more prominent in the light effect and index.
.jpg)
.jpg)
The eutectic process uses a plurality of metals to melt at a eutectic temperature to form a eutectic alloy, thereby soldering the LED chip on a substrate or a support. The high-power LED device using the eutectic process can meet the requirements of a more severe use environment in the automobile. Wide range of applications in lighting and other fields. We can reflect the stability and reliability of the welding process through the test of eutectic voids.
The detection accuracy of this X-Ray inspection equipment is 1um. From the picture, the eutectic welding performance is basically good and the void is small. Moreover, it can be seen that the eutectic soldering area at the edge of the chip is large, and the relative heat dissipation is also better.
For the above part of the evaluation report, please click on the detailed report:
Http://?i=100000202495385&m=116002
As a domestic LED packaging company that started to develop automotive LED light source products earlier, Hongli Optoelectronics has strictly followed the ISO/TS16949 quality management system and launched a series of high brightness, high reliability and low for automotive interior and exterior light source applications. Power consumption and fast response automotive LED package products. In addition to the C2525 introduced above, there are also high-power C5050/C2016 series models, which can be flexibly matched with the design requirements of automotive customers. It is the first choice for the application of headlights and work lights, and it is the safest guarantee for driving.
Smart down light with both warm light and RGB colorful light, it can meet the daily lighting and ambient lighting, high efficiency and energy saving, light source is stable and without strobe. Three color temperatures can be choosed for white lighting, 3000K, 4000K and 65000K. The color, brightness and RGB lighting auto-cycle mode can be controlled on the App. Three sizes of down lights for customer`s choice, small , middle and big sizes can meet different requirements, and the installation is very easy.
Product Parameters
Working Voltage: AC110-240V
Frequency: 50-60HZ
Lamp Power: 9W
Lumen: 805LM
Color: RGB+CCT
Protocol: Bluetooth Mesh
Wireless Transmission: 20m
Control Way- Smart APP Control
The light color, brightness, cycle mode and timing can be controlled by App.The App are developed on the most advanced Bluetooth Mesh technology. [LinkupHome" App can be downloaded in the App store or Google Player, then you can control our product without any complicated steps. The App is stable, easy control and multifunctional.
Smart Technology- Bluetooth Mesh
The advantages of Bluetooth Mesh are fast connect, low power consumption, no password required and Ad-Hoc Network. No need WIFI and hubs, as long as you have a Bluetooth-enabled smart phone, you can experience the smart light. When you install several smart down lights, the self-organizing network function can make the signals free connect, break the limitation of distance.
Smart Down Light,Smart LED Downlight,Smart Economic Downlight,Smart Home Down Light
Ningbo Homey Photoelectric Technology. Co., Ltd , https://www.linkuphome.com