The installation of a computer option is just like the decoration of a new house, and the matching, within the allowable scope of the wallet, can be combined according to their own needs and preferences of their favorite styles and programs, and recently just installed a new host, in the selection And spend a lot of color on the mind, just right here, let me share some experience on computer installed color.
Matching ideasSpeaking of the computer's color matching, red and black can be considered widely accepted by the public and enduring color, it is also for this reason, the major manufacturers are also very fond of the introduction of this color matching products, so after determining this color combination there will be a lot of The products are available for selection, so red and black are relatively easy to implement, and there is no need to make too many tangle in the selection for color matching.
First of all, explain the configuration of the machine. My idea is basically to consider the matching of colors on the basis of satisfying the performance. If the colors cannot be coordinated, make some compromises on the bottom line.
Install the family before the installation!
The selection of a CPU for the country’s box office may not be a wise choice for some value-friends who start at eBay with God’s price. However, being able to get a smooth sea-to-hand experience not only requires a sophisticated Haitao experience but also requires good luck, so I’m still honest. Select the country line box.
It is widely believed that the i7-6700K made in Malaysia is a little better than the one made in Vietnam, and the facts behind prove that I have had a good luck this time.
JD's CPU prices seem to be high, but because there are often such activities as "Buy 4 categories and full 3000.00 yuan minus 200.00 yuan, 4 categories and 4000.00 yuan minus 300.00 yuan, 4 categories and full 6000.00 yuan minus 500.00 yuan" activities Therefore, if most of the accessories are purchased at the same time, it can save a lot, and buying a CPU alone has no advantage at all.
Because of the need for overclocking, motherboards other than the Z170 chipset will not be taken into consideration. The three brands of red and black color matching Z170 motherboards are basically more than a thousand dollars. Which one to choose depends on the preference. The MSI Z170A GAMING M3 is relatively speaking. To be cheaper (Ma Yun price).
Then this is two worth considering the red and black color matching Z170 motherboard, like red and black color value friends can tangled between the three motherboards, if you have faith, wallets can also force the ASUS player country series can be directly selected.
From the decision to use the vest, high-performance air-cooled radiator can basically be PASS, because the fan will fight with the memory fins, and now can only choose one of the integrated water-cooled radiator, and finally selected this Kyushu Captain 120 Fengshen, At present, this series has gone to the second generation. However, according to my observation for some time, it has been found that the cases of leakage in the second generation are much higher than those in the first generation. Therefore, it is still a good thing for the provincial election.
Incidentally, here to share an experience, everyone must pay close attention to the sound of the water pump when using the integrated water-cooled radiator. If it is found that the noise of the water pump is significantly increased or abnormal sounds occur, it is necessary to immediately shut down and check, in the event of water leakage and no timely treatment. The effect is unimaginable, and regular inspections may be necessary. Compared with air cooling, integrated water cooling is more troublesome.
The ZigZee Trident Z series has always been a masterpiece of high-value memory, and I think that in terms of face value, only pirate ship platinum rulers and the new Avenger LED version can compete with it. However, Zickey Trident Z DDR4 3200 CL14 can Confirmation is Samsung B die particles, timing is better than the Corsair's, a lot of like memory overclocking should know the benefits of Samsung B die particles.
The heat sink has different colors on both sides. The silver side is black and the red part on the top is plastic. The only regret is that this memory has no light.
From the top of the PCB you can see that the memory itself uses a ten-layer PCB design.
The heat sink is very thick and the memory is very heavy on the hand. However, it should be noted that the appearance of the memory heat sink is easy to scratch, to avoid bumping during installation.
There are also several red and black color memory I have considered before, although in the end there is no choice, but here are also shared, we can refer to it.
After updating to Pascal architecture, the performance advantages of this generation of N-cards are quite obvious. As the most powerful graphics card except TITAN X, GTX 1080 is highly rated for its performance and power consumption, except that the price is not very friendly. If you care about cost-effective, GTX 1070 is also a good choice.
Compared to the public version of the GTX 1080, the MSI GTX 1080 Duke 8G has a higher default frequency, an additional 6-pin power input, and a PCB that uses a longer and wider design. The LOGO position supports RGB lighting effects.
The backplane has a carbon fiber pattern, but failing to cover the entire radiator does not look perfect.
In fact, in terms of color, this red dragon should be a better choice, although the fan is one less, but the radiator heat pipe materials more fierce, but with the difference between my paragraph 400 ocean, whether it is worth seeing.
Abandoning the traditional SATA SSD, in addition to achieving higher performance, the routing is also optimized. The PCIE SSD is not limited by its size, and the heat sink can be exaggerated. Therefore, the thermal performance is not comparable to that of the M.2 SSD, if not for color matching. Maybe I will choose Intel 750 400G.
The Plextor M8PeY 512G PCIe NVMe SSD heatsink is very thick and the components are really light, with a white LED on the front LOGO.
The side position is also lighted and flashes as the SSD reads and writes. Unfortunately, the tail position needs to be plugged into the SATA supply cable and cannot be completely uncoupled from the cable.
Compared to graphics cards, the size of this SSD is really insignificant, and even if it is installed close to the graphics card, it will not affect heat dissipation too much.
If you think the price of PCIE SSD is too high, I also recommend two SATA SSDs that are suitable for red and black colors for reference.
The UMX4 chassis has been listed for more than half a year, but the aunt could not find the relevant original. Do not know if my count is not the first sun.
Compared with the smaller size of a general ATX chassis, the double-sided side-transparent glass is 100 yuan more expensive than the regular version, and the side-through version is used to not miss the beauty inside the chassis.
The top can be installed with 240 cold rows, the original fan is a thin fan, immediately replaced.
Inside the chassis, the space is much more compact than the new RM4.
Back close-up, the bottom power jack leads to the power supply through an extension cord.
Metal nameplate close-up.
At the bottom is the air intake passage of the chassis. The standard is a dust-proof net that uses magnetic attraction. It is removable and washable.
The rubber mat protects the glass.
It is worth mentioning that Qiao Sibo's chassis with a nameplate can be custom-designed, and can also be replaced with other color light boards. If necessary, you can go to its home Tmall shop for customization.
The power is transferred directly from the old machine. The XFX XTR 750W gold medal full module adopts the LLC+ synchronous rectification + DC-DC efficient solution. It is no problem to deal with the GTX 1080 dual card. The single card is simply a piece of cake, and the balance is very good. .
Chassis fans selected Joe Sibo's eclipse PWM version, compared to the old version into a 4pin interface, controllable speed, but I recently discovered that Qiao Sibo has released a new solar eclipse FR-101, this is a lot better than it is now, but After all, it has been started for a while, return is not possible, and so tired of changing it again.
TT Riing is also a chassis fan that I like very much. There are 12cm and 14cm two kinds of specifications, in addition there are RGB lighting version, willing to spend directly to buy RGB version in one step, after the change of color can continue to use, new That section also supports software control, that is, the price is not cheap, can not afford to worry about.
To be honest, the solar eclipse as a chassis fan is acceptable. To blow the cold row is a bit uncomfortable, so the cold-blowing fan uses the Kyushu FENGSHEN TF120. These two fans were originally prepared to blow the twin tower radiators, but later plans to have Change, this can finally be used. In addition, the fan line is very hard and the cable is a little inconvenient.
The following set of screws is purely for color matching, but in the end it is also well-suited for bowl-type screw spacers. Others are reserved for use, and cost-effective.
The installation process will not elaborate, and finally show the finished product.
This luck is good, this i7-6700K overclocked 4.5G can be stabilized at a voltage of 1.2V, compared with the CPU-Z 6270K, which is the frequency of the single-core performance increase of about 11%, multi-threaded increase of about 14%.
The motherboard BIOS opens the XMP option with memory running at 1600 MHz (equivalent to 3200) and the default timing is 14-14-14-34.
SSD running points, this speed is not comparable to any SATA SSD, after all, it took more than 2 times the price, the use of experience, upgrade is actually far less mechanical hard disk replacement into a solid state hard drive so much, but this run points to bring the superiority is Unable to replace, haha.
In the end, the graphics card runs points. Thanks to the preset high frequency, the running points have improved and are quieter than the public version.
When installed in front of the end of the graphics card found a bit sinking, although does not affect the use, but the onset of obsessive-compulsive disorder is difficult to accept, and finally decided to buy the card to send the stent to go up.
The cold bracket needs to be assembled before use. It is quite simple and the instructions don't need to be read.
Supports up to two graphics cards at the same time.
The utility model can be used as a stand for headphones, but the center of gravity at the bottom is not very stable, and it is necessary to pay attention to the safety of earphones that are particularly heavy.
With the support frame, the graphics card is finally straight.
This tossing ended here, and this time I spent a lot of thought on colouring. Although not necessarily the perfect combination in my eyes, I have no great regret for myself. Take me this set of red and black color matching host, the silver-white module line and the white chassis nameplate is added some embellishment, everybody may use the red and black color match may increase the white element perhaps may have the unexpected result. Well, the article ends here, this time with the show as the main, then there will be in-depth use of SSD and memory experience sharing, if you are interested, please continue to pay attention, and then.
Power 30W ,output voltage 3-12V, output current Max 1.2A , USB output 5v 2a, 6 dc tips. We can meet your specific requirement of the products, like label design. The material of this product is PC+ABS. All condition of our product is 100% brand new.
Our products built with input/output overvoltage protection, input/output overcurrent protection, over temperature protection, over power protection and short circuit protection. You can send more details of this product, so that we can offer best service to you!
30W Wall Adapter ,30W Wall Power Supply,30W Power Cord In Wall, 30W Wall Power Adapter
Shenzhen Waweis Technology Co., Ltd. , https://www.waweis.com