On January 8th, the US Federal Trade Commission (FTC) issued G/TBT/N/USA/500 notification to revise the label of the lamp. In addition to the recommended product labeling requirements above, the FTC also requires that the light of the lamp be marked on the bulb. Therefore, the FTC decided to revise the current labeling scheme, which covers mainly ordinary household lighting bulbs, including general incandescent lamps, CFLs and LED lamps. In addition, it is easy for consumers to mistake power as a measure of the brightness of the lamp.
On November 16, 2009, the US Federal Trade Commission (FTC) issued a notice G/TBT/N/USA/500 to revise the label of the lamp. According to Section 321 of the US Energy Independence and Security Act of 2007, the FTC needs to consider the validity of the current lamp label and develop a more reasonable alternative labeling scheme. At present, the labels of the lamps required by the FTC mainly include information on light transmission, power and life. After research, the label is not enough to fully reflect the important information of the light, such as color temperature, etc. are not marked. In addition, it is easy for consumers to mistake power as a measure of the brightness of the lamp. Therefore, the FTC decided to revise the current labeling scheme, which covers mainly ordinary household lighting bulbs, including general incandescent lamps, CFLs and LED lamps.
Packaging label
There should be brightness and Energycost information on the front panel of the package
There are LightningFacts labels on the side or back panel of the package
2. Product label
In addition to the recommended product labeling requirements above, the FTC also requires that the light of the lamp be marked on the bulb. For lamps containing mercury, the notice requires the manufacturer to indicate the following information at a location on the lamp: “ContainsMERCURY.See epa.gov/bulbrecyclingor1-800-XXXXXXX.â€
Our wire and cable requires for product quality certification documents from the supplier, The wiring shall have the factory quality certificate documents, including: certificate of quality (the certificate has the production license number and the "CCC" certification mark), test report and the "CCC" certification certificate; he quality certificate of electric wire shall be the original, if it is a copy, the copy shall be consistent with the original content, with the official seal of the original storage unit affixed, indicating the place where the original is stored, and the signature and time of the handler; The manufacturer shall have the business license of enterprise legal person.
Automotive Wire Connectors,Waterproof Wire Connectors,Wire Connectors,Wire Harness Connectors
Dongguan YAC Electric Co,. LTD. , https://www.yacentercn.com