Pipeline dispenser purchase and installation guide

First, what kind of appearance of the pipeline drinking fountains for your home?

1, wall-mounted: small office, bedroom, living room;

2, the wall type: small office, bedroom, living room;

3, vertical: living room, hall, meeting room, corridor.

Second, the industry pipeline drinking fountains heating, cooling principle?

1, heating principle:

A traditional stainless steel heating gallbladder: the first heating speed is generally 10-15 minutes, when the water temperature is lower than 85 degrees, the heating system automatically reheats to 96 degrees; the heat gallbladder capacity is generally between 0.5-5 liters.

b quartz tube rapid heat type: the current market is more popular heating method, that is, heat without waiting. There is no need to consume electricity, and the water is not heated repeatedly. The general heating power is 1800-2500W.

c Intra-film heat-type: good stability, high cost, adjustable temperature. The heating body is smaller and divided into stainless steel blocks or rare earth blocks. The heating speed is only 3-5 seconds and the temperature can be adjusted. Heating power is generally between 1600-2300W, and some high-end brands in the industry are adopting it.

d boiling kettle heating: belongs to the external kettle base heating, that is, the principle of heating kettle. The heating speed is faster and the heating performance is not stable. Heater contact is prone to failure!

2, refrigeration method:

a Electronic refrigeration: also known as semiconductor refrigeration. Mainly through the electronic refrigeration chip to achieve cooling purposes. It features low power consumption, low operating noise, no pollution, automatic control and low price. The inadequacies are the slow speed of refrigeration and the low supply of cold water, which is suitable for households and units with few drinking water. The cooling temperature is 10-15 degrees, the cooling speed is 20-50 minutes, and the cooling power is 50-120W.

b Compressor refrigeration: The refrigeration principle of the compressor refrigeration water dispenser is the same as that of the refrigerator. The difference is that the evaporator is wound around the stainless steel tank wall to absorb heat to cool the water. Its cooling capacity is about 3 liters and the cooling power is between 75-110W. The cooling temperature is 8-12 degrees. With the features of high reliability, high cooling efficiency, fast cooling speed and large amount of cold water supply, the refrigeration performance is obviously better than the electronic refrigeration water dispenser, but the price is more expensive and it is suitable for drinking water. It is used by families and units with a large number of people. Third, the wiring design of the pipeline water dispenser:

Before the use of the environment is not renovated, so that the plumber will be commonly used in the pipeline to the installation of four pipe dispensers (wall-mounted machine 1.5-1.8 meters away from the floor is appropriate; desk-style if placed on a desk or coffee table should lead to the placement of equipment 4 lines of vertical internal lines are reserved, 4 lines of vertical pipelines are installed at a height of about 1.0 from the ground, and 4 lines of internal line interfaces are reserved.

Note: The inlet of the drinking line of the pipeline is connected to the pipe port with a 4 change 2 quick-connect fitting.

Fourth, when using the precautions:

1. If you do not use it for a long time, turn off the water supply and power supply in time;

2. When the pipeline drinking machine is not used for a long time, it must be discharged from the original hot water and cold water. Add water after drinking again to avoid odor when drinking.

3, the traditional hot-wire heating line drinking fountains, the first application must be hot taps, cold taps will open the water and then open the heating and cooling switches.

4. Do not place heavy, hot items on the top of the vertical pipeline machine.

5. Before installing the quick-heating type pipeline water dispenser, because it belongs to high-power equipment, please check whether the voltage loading load exceeds the standard. Is the circuit line aging?